Модуль:languages/data/3/s/doc
Көрүнүш
This is the documentation page for Модуль:languages/data/3/s
This module contains definitions and metadata for three-letter language codes starting with "s
". See Wiktionary:Languages for more information.
This module must not be used directly in other modules or templates. The data should be accessed through Module:languages. For the corresponding extra data, see Модуль:languages/data/3/s/doc/extra.
Каталар
[түзөтүү]Module:data consistency check аркылуу төмөнкү каталар аныкталды:
- Норвегиялык бокмал тили (
nb
) Орто норвег тили (gmq-mno
) ата-бабасы катары белгиленген, бирок Батыш Скандинавиялык үй-бүлөдө (gmq-wes
) жок. - Норвегиялык бокмал тили (
nb
) Дания тили (da
) ата-бабасы катары белгиленген, бирок Чыгыш Скандинавия үй-бүлөсүндө эмес (gmq-eas
).
- Кариб индустан тили (
hns
) анын ата-бабасы катары белгиленген бхожпури тили (bho
) бар, бирок бихари үй-бүлөсүнө кирбейт (inc-bih
). - Кариб индустан тили (
hns
) анын ата-бабасы катары белгиленген авадхи тили (awa
) бар, бирок чыгыш хинди үй-бүлөсүнө кирбейт (inc-hie
).
- Лети тили (
lti
) Module:languages/data/3/l маалыматтары бар, бирок Module:languages/data/3/l/extra ылайыктуу маалыматтары жок.
- Прото-Борбордук Того тили (
alv-gtm-pro
) Гана-Того тоо тилдеринин (alv-gtm
) прото тили болгонуна карабастан, күтүлгөн "Прото-Гана-Того тоосу" аталышына ээ эмес. - Прото-арава тилинде (
auf-pro
) арауан тилдеринин (auf
) прото-тили болгону менен күтүлгөн "прото-арауан" аталышы жок. - Прото-Амуеша-Чамикуро тилинде (
awd-amc-pro
) awd-amc жараксыз код менен байланышкан прото-тил коду бар. - Прото-Кампа тилинде (
awd-kmp-pro
) жараксыз awd-kmp коду менен байланышкан прото-тил коду бар. - Прото-Аравак тили (
awd-pro
) аравакан тилдеринин (awd
) прото-тили болгону менен күтүлгөн "Прото-Аравакан" аталышына ээ эмес. - Прото-Пареси-Ваура тилинде (
awd-prw-pro
) awd-prw жараксыз код менен байланышкан прото-тил коду бар. - Прото-Та-Аравак тили (
awd-taa-pro
) та-аравакан тилдеринин (awd-taa
) прото-тили болгону менен, күтүлгөн "Прото-Та-Аравакан" аталышына ээ эмес. - Прото-рукай тилинде (
dru-pro
) үй-бүлө эмес, Rukai (dru
) менен байланышкан прото-тил коду бар. - Прото-баск тилинде (
euq-pro
) васкон тилдеринин (euq
) прото-тили болгону менен күтүлгөн "Прото-Васкондук" аталышы жок. - Прото-Норсе тили (
gmq-pro
) Түндүк герман тилдеринин (gmq
) прото-тили болсо да, күтүлгөн "Прото-Түндүк Герман" аталышына ээ эмес. - Прото-Камта тили (
inc-krn-pro
) КРНБ лекциясынын (inc-krn
) прото-тили болсо да, күтүлгөн аталышка ээ эмес "Proto-KRNB lects". - Проточумаш тилинде (
nai-chu-pro
) чумашан тилдеринин (nai-chu
) прото-тили болгону менен күтүлгөн “Прото-Чумашан” аталышы жок. - Протомайдун тилинде (
nai-mdu-pro
) майдуан тилдеринин (nai-mdu
) прото-тили болгону менен күтүлгөн «Прото-майдуан» аталышы жок. - Прото-миксе-зок тили (
nai-miz-pro
) Mixe-Zoquean тилдеринин (nai-miz
) прото-тили болсо да, күтүлгөн "Прото-микс-зокеан" аталышына ээ эмес. - Прото-помо тилинде (
nai-пом-про
) помоан тилдеринин (nai-pom
) прото-тили болгонуна карабастан, күтүлгөн "Прото-Помоа" аталышы жок. - Прото-Мазатец тили (
omq-maz-pro
) Мазатекан тилдеринин (omq-maz
) прото-тили болгонуна карабастан, күтүлгөн "Прото-Мазатекан" аталышына ээ эмес. - Прото-осетик тилинде (
os-pro
) үй-бүлө эмес, осетин (os
) менен байланышкан прото-тил коду бар. - Прото-Түндүк Саравак тили (
poz-sva-pro
) Түндүк Саравакан тилдеринин (поз-sva) прото-тили болгонуна карабастан, күтүлгөн "Түндүк-Түндүк Саравакан" аталышына ээ эмес. - Прото-салиш тили (
sal-pro
) салишан тилдеринин (sal
) прото-тили болгону менен күтүлгөн "Прото-Салишан" аталышына ээ эмес. - Прото-сами тилинде (
smi-pro
) сами тилдеринин (smi
) прото-тили болгону менен күтүлгөн "Прото-сами" аталышы жок. - Прото-куки-чин тили (
tbq-kuk-pro
) кук тилдеринин (tbq-kuk
) прото-тили болгону менен күтүлгөн "Прото-Кукиш" аталышына ээ эмес. - Протосак тили (
xsc-sak-pro
) сак тилдеринин (xsc-sak
) прото-тили болгону менен күтүлгөн "Прото-Сакан" аталышына ээ эмес.
- Адабий кытай тили (
lzh-lit
) уникалдуу эмес канондук аталышка ээ;lzh
код менен да колдонулат. - Маалымат ачкычы
preprocess_links
үчүн ??? (th-new
) жараксыз.
- Эски индо-арий үй-бүлөсүндө (
inc-old
) балалуу үй-бүлөлөр же тилдер жок.
- Адабий кытай,
lzh-lit
кодунун канондук аталышы туура эмес; ал адабий кытай болушу керек.
- Адабий кытай,
lzh-lit
кодунун канондук аталышы туура эмес; ал адабий кытай болушу керек.
- ira-mid кодун жана канондук орто ирандык аталышты алып салуу керек; алар Module:families/data да табылган эмес.
- ira-old коду жана эски ирандык канондук аталышы алынып салынышы керек; алар Module:families/data да табылган эмес.
- ira-mid кодун жана канондук орто ирандык аталышты алып салуу керек; алар Module:families/data да табылган эмес.
- ira-old коду жана эски ирандык канондук аталышы алынып салынышы керек; алар Module:families/data да табылган эмес.
Керектүү баалуулуктар
[түзөтүү]Таблицадагы ар бир жазуу төмөнкү индекстелген талааларды камтышы керек:
1
- Тилдин "канондук" аталышы. Бул Уикисөздүк жазууларында жана категория аттарында колдонулган ат.
2
- Тил үчүн Wikidata пунктунун id (Q номери). Сан (оң бүтүн сан) же
Q
менен башталып, ондук цифралар менен аяктаган сап катары көрсөтүлүшү мүмкүн. Белгисиз/бар болсоnil
коюу. Бул эскиwikipedia_article
касиетин алмаштырат, аны дагы эле белгилүү бир бөлүмдөргө же тилдеги басылмаларга шилтемелөө үчүн колдонсо болот.
Кошумча баалуулуктар
[түзөтүү]3
- The code for the family that the language belongs to. See Wiktionary:Families.
4
- A list of script codes. See Wiktionary:Scripts. These represent all the scripts (writing systems) that this language uses in the real world, as well as the ones that Wiktionary uses. The scripts that are used most often on Wiktionary should be first in the list, as this will speed up script detection.
- Many templates and modules detect the script of text in a particular language using the
lua
method in Module:languages. This function goes down the list of scripts and counts how many characters in the text belong to each script. If all the characters belong to one script, that script will be returned; otherwise, the script with the most characters will be returned. Thus, script detection will be faster if the most frequently used scripts are first in the list. If none of the characters match any of the listed scripts, then theNone
script is returned (even if the characters would match a script not listed). Translingual (mul
) and Undetermined (und
) have the special valuelua
, which means they are treated as having every script. This value should not be set for any other language codes. - Due to the ongoing problems with Lua memory limits, this should be given as a comma-separated list in a string (and not a table). This is then converted into a table when returned. For example:
lua
. type
- The type of language (which affects how it is handled on Wiktionary). Possible values are:
regular
- This value is the default, so it doesn't need to be specified. It indicates that the is attested according to WT:CFI and therefore permitted in the main namespace. There may also be reconstructed terms for the language, which are placed in the Reconstruction namespace and must be prefixed with * to indicate a reconstruction.reconstructed
- This language is not attested according to CFI, and therefore is allowed only in the Reconstruction namespace. All terms in this language are reconstructed, and must be prefixed with *.appendix-constructed
- This language is attested but does not meet the additional requirements set out for constructed languages (WT:CFI#Constructed languages). Its entries must therefore be in the Appendix namespace, but they are not reconstructed and therefore should not have * prefixed in links.
ancestors
- A list of the language codes of the direct ancestors of this language. For example, the ancestor of English is listed as
enm
(Middle English);ang
(Old English, the ancestor of Middle English),gem-pro
(Proto-Germanic, the ancestor of Old English), andine-pro
(Proto-Indo-European, the ancestor of Proto-Germanic) are not listed. - For most languages, only one ancestor code should be given, but multiple ancestors can be listed for pidgins, creoles and mixed languages.
- The ancestor language list should not be included if the language's direct ancestor is the proto-language of the family to which the language belongs. In such a case, if the family code has been provided, Module:languages will automatically add the proto-language as the language's ancestor. For example, Proto-Germanic (
gem-pro
) belongs to the Indo-European (ine
) family, and its direct ancestor is Proto-Indo-European (ine-pro
). Because Proto-Indo-European is the proto-language of the Indo-European languages, Proto-Germanic does not need anancestors
table; Proto-Indo-European will be automatically returned as its ancestor by thelua
function. - Due to the ongoing problems with Lua memory limits, this should be given as a comma-separated list in a string (and not a table). This is then converted into a table when returned. For example:
lua
. wikimedia_codes
- A list of the Wikimedia language codes that this language maps to. This is used to translate Wiktionary codes to Wikimedia codes, which are usually the same but there are a few languages where it is different. The language codes must be valid Wikimedia codes (as determined by the wiki software), and if they are not defined in one of the language data modules, they must be defined in Module:wikimedia languages/data.
- Due to the ongoing problems with Lua memory limits, this should be given as a comma-separated list in a string (and not a table). This is then converted into a table when returned. For example:
lua
. - Note that Wikimedia <-> Wiktionary language codes are currently defined in four places: the language modules (as documented here); Module:wikimedia languages/data;
in Module:translations/data; and the
field of the `metadata` variable in MediaWiki:Gadget-TranslationAdder-Data.js. FIXME: Unify this data.
wikipedia_article
- The name of the Wikipedia article for the language. Should normally only be supplied if the Wikidata id cannot be used.
translit
- See the Substitutions section for instructions on syntax.
- Defines how a language should be transliterated, which will be automatically applied to any terms in scripts that do not have their
isTransliterated
value set tolua
in Module:scripts/data. This is used bytransliterate
in Module:languages. link_tr
- Set this to
true
to link the language's transliteration. For instance, Gothic has entries in Gothic script and entries for transliterations: э.. Otherwise, this can be a comma-separated list of script codes, which means that links are only applied to terms using those scripts. override_translit
- Set this to
true
to make the automatic transliteration override an any given manual transliteration. Otherwise, this can be a comma-separated list of script codes, which means that the override is only applied to terms using those scripts. display_text
- See the Substitutions section for instructions on syntax.
- Defines replacements to create the display form of the text, which is the form actually displayed on the page. This is occasionally necessary if there is a recurring issue of editors adding the wrong character, which is sometimes an issue when two or more characters are easy to confuse. For example, the palochka
ӏ
, used in Cyrillic in many Caucasian languages, is frequently entered asI
, or even Latinl
orI
. As this is an ongoing issue (even among native speakers), the easiest way to solve the problem is to automatically correct the display form for those languages. This is used bymakeDisplayText
in Module:languages. entry_name
- See the Substitutions section for instructions on syntax.
- Defines replacements to create the entry name from the displayed form of a term. This can be used to remove certain diacritical marks according to the customs or standard practice of the language. For example, it is used to remove accent marks from Russian words (
ру́сский
→русский
), or macrons from Latin or Old English words (ōs
→os
), as these are not used in the normal written form of these languages. This is used bymakeEntryName
in Module:languages. sort_key
- See the Substitutions section for instructions on syntax.
- Defines replacements to create a category sort key from the page name. The purpose is to:
- Remove any characters that should be ignored in sorting.
- Replace characters with other characters, if the sorting rules for that language do not distinguish them. For example, in German, the characters "ä" and "a" are considered equivalent for sorting, and are both treated as "a".
- Replace characters that should be sorted in different places with special characters that mimic that behaviour, (which is necessary due to MediaWiki software using the Unicode codepoint to determine sort order, which is often arbitrary). For instance, in Mongolian, the letter "ү" should be sorted after "у", but due to its codepoint it is sorted after the final letter "я" by default. As such, we can replace "ү" with "у" plus a character with a very high codepoint, which ensures that it is always sorted straight after. The data modules contain an in-built way to do this for the sake of convenience: with the above example, this would be done by using
lua
. Another character could be inserted straight after by usinglua
(and so on).
- Note: the term is converted to lowercase before applying any substitutions, so you should not try to process capital letters (as it will not work). This is used by
makeSortKey
in Module:languages. dotted_dotless_i
- Set this to
true
for languages that distinguish between the dotted and dotless I (such as some Turkic languages).
Алмашуулар
[түзөтүү]lua
,lua
,lua
andlua
all use the same syntax, which is designed to be as flexible as possible:- If they are a string, then this is treated as the name of a dedicated module which will be used to generate the output. For example,
lua
refers to Module:sa-translit. - If they are a table, then it can contain two kinds of keys:
- The keys
lua
,lua
,lua
andlua
relate to text substitution (see below). - Script code keys are used to specify script-specific behaviour. These, in turn, can be strings (for dedicated modules) or tables (for text substitution). In addition, a value with the key
Lua
can be used as a fallback, which will be used if no specific behaviour is defined for that script.
- The keys
- Note: if script keys and text substitution keys are given in the same table, then the text substitution will be applied after the script-specific behaviour has completed. Ensure any fallback text substitutions are given as a subtable with key
Lua
if you want to avoid this. It is not possible to process the output of a script-specific module with another module, however: this should be done (for example) with a tail call in the first module.
- If they are a string, then this is treated as the name of a dedicated module which will be used to generate the output. For example,
- Dedicated modules must take the arguments
lua
, wherelua
is the input text (usually the page name or input by the user),lua
is the language code (not the language object), andlua
is the script code (not the script object). For performance reasons, they should only be used when it is not possible to achieve the desired result via text substitution. - Text substitution replaces or removes certain characters (or sets of characters) for particular contexts. There are three ways to do this:
- Using the
lua
andlua
keys. lua
(and optionallylua
).- Both of the above (in that order).
- Using the
lua
is paired withlua
, and both of them must be tables that are organised pairwise: each element inlua
is a pattern to identify which characters in the term to replace, while the corresponding element inlua
defines what to replace them with (as arguments tolua
).- If the replacement is not present (or if it is
lua
orlua
), then any matching characters are removed altogether. This means that thelua
list can be longer than thelua
list, and an empty replacement will be assumed for any elements inlua
that have no counterpart inlua
. - The tables can contain literal characters, or the patterns (a simplified form regular expressions) that are used by the standard Scribunto
lua
function. See the Scribunto reference manual for more information. Note that patterns make double substitutions a viable way to achieve more complex results. See the Latin sortkey for Mandarin (cmn
) as an example of this. lua
is a string which contains characters that will be removed after the text is decomposed. For instance, iflua
is a combining acute accent, all acute accents will be stripped, even if they are part of precomposed characters (such as
- REDIRECT Template:link or
- REDIRECT Template:link). Despite the name, the characters to be stripped need not be diacritics: for instance, including an apostrophe would remove all apostrophes (though be careful with hyphens, which must be be escaped as
lua
).
- Furthermore, if
lua
is given, then it is possible to specify alua
table, which prevents specific characters from having their diacritics stripped. For instance, iflua
is a combining diaeresis, butlua
containslua
, then any instances ofё
will remain unchanged. On the other hand, an instance ofӱ
would still becomeу
(unlesslua
is also added tolua
).
Мурда колдоого алынган баалуулуктар
[түзөтүү]aliases
,varieties
,otherNames
- This data is now located in the extra data modules; see Module:languages and Template:тилден тышкары документтер.
family
- Now
3
. scripts
- Now
4
.